1 099.00 RON

Cod: Trakmaster Pro

Garantie: luni

In stoc

Nu include transport

Pagina producatorului

Review indisponibil

Key Features

Award-winning Class A discrete transistor-based Focusrite pre-amps
This pre-amp demonstrates the same wide bandwidth philosophy featured in the original vintage Focusrite units, ensuring low noise and distortion.
'Pro Series' Latency-free monitoring
Monitor your source signals within the mix, directly at source, avoiding having to resort to monitoring via your DAW or digital desk, both of which may be prone to latency issues.
Custom Opto Compression
With the addition of variable attack and the unique ‘Squash' mode (ideal for intense drum sounds), this compressor gets you the compression sound you need in seconds.
Optional Stereo 24 bit / 96kHz ADC
Tracking a vocal direct into your DAW or any other digital recording media has never been easier or more affordable. The Platinum Pro ADC provides a stereo digital S/PDIF audio output and can be retro-fitted at any time.
Switchable impedance
The Low Impedance switch brings yet further sound options to your recording, allowing you to get more from your microphone and make the most of ribbon mics, which perform best when combined with a low impedance preamp.
Front Panel Direct Instrument Input
For quick and easy connection without the need for a separate DI box. A High Gain switch provides the option to boost the incoming signal by 20dB - ideal for passive guitars.
Mid Scoop EQ
The Mid-scoop EQ is a quick and effective problem-solver. With two different depths of cut and an adjustable frequency control, it's ideal for vocal problem solving or for creating great miked-up cabinet ambience.

Mic Input Response
• Gain = +13dB to +60dB
• Input impedance = 2.5k Ohm (150 Ohm in Lo Z mode)
• EIN = 126dB @ 60dB gain with 150 Ohm termination & 22Hz/22kHz filter
• THD+N @ min gain (+13dB) = 0.001% with 0dBu input & 22Hz/22kHz filter
• THD+N @ max gain (+60dB) = 0.009% with -38dBu input & 22Hz/22kHz filter
• THD+N @ max input (+8dBu) = 0.001% with 22Hz/22kHz filter
• Frequency response @ min gain (+13dB) with -13dBu input = -3dB @ 10Hz & -2.3dB @ 200kHz
• Frequency response @ max gain (+60dB) with -60dBu input = -3dB @ 13Hz & -3dB @ 78kHz
• CMRR @ max gain (+60dB) = 80dB

Line Input Response
• Gain = -10dB to +36dB
• Input impedance = 24k Ohm
• Noise @ unity gain (0dB) = -88dBu with 22Hz/22kHz filter
• S/N ratio relative to max headroom (+36dBu) = 124dB
• S/N ratio relative to 0dBFSs (+22dBu) = 110dB
• THD+N @ unity gain (0dB) = 0.001% with 0dBFS (+22dBu) input and 22Hz/22kHz filter
• Frequency response @ unity gain (0dB) = -2.8dB @ 10Hz & -3dB @ 200kHz

Instrument Input Response
• Gain = +13dB to +60dB
• Input impedance = 1M Ohm
• Noise @ min gain (+13dB) = -87dBu with 22Hz/22kHz filter
• Noise @ max gain (+60dB) = -45dBu with 22Hz/22kHz filter
• THD+N @ min gain (+13dB) = 0.004% with 0dBu input & 22Hz/22kHz filter
• Frequency response @ min gain (+13dB) with -13dBu input = -3dB @ 10Hz & -2.3dB @ 200kHz

Level Meter
• Peak Level Moving Coil Meter
• Input & Output: -24dBFS to +2dBFS (-2dBu to +24dBu), +22dBu = 0dBFS
• Gain Change: 0dB to 24dB

Hi Pass Filter
• Roll-off = 12dB/octave 2-pole filter
• Cutoff frequency = -3dB @ 120Hz, -6dB @ 85Hz, -12dB @ 56Hz

Mid Scoop EQ
• EQ shape = peak
• Centre frequency = variable between 120Hz and 2kHz
• Cut (DEEP switch out) = -5dB
• Cut (DEEP switch in) = -10dB
• Q (DEEP switch out) = 0.7
• Q (DEEP switch in) = 2

Compressor
• Threshold range (SQUASH switch out) = -54dBFS (-32dBu) to -18dBFS (+4dBu)
• Threshold range (SQUASH switch in) = -37dBFS (-15dBu) to -4dBFS (+18dBu)
• Compressor ratio (SQUASH switch out) = 2.5:1
• Compressor ratio (SQUASH switch in) = 35:1
• Noise = -90dBu measured with a 22Hz/22kHz bandpass filter
• Make-up gain = 0 to +30dB

ADC Performance
• Sample Frequency = 44.1kHz, 48kHz, 88.2kHz & 96kHz
• Bit Depth = 24bit
• Maximum analogue input level = +22dBu (0dBfs)
• Dynamic Range = 109dB 'A' Weighted

Ext Wordclock Input
• BNC connector

ADC Ext In
• Balanced 1/4" TRS jack socket input (+4dBu)

Monitor In
• 2 x balanced 1/4" TRS jack socket inputs (+4dBu)

Monitor Out
• 2 x balanced 1/4" TRS jack socket outputs (+4dBu)

Line Out
• Balanced 1/4" TRS jack socket output (+4dBu)
• Unbalanced 1/4" TRS jack socket output (-10dBV)

Weight
• 2.38kg
• 5.2Ibs

Dimensions
• 484mm (W) x 44mm (H) x 183mm (D)
• 19" (W) x 1.7" (H) x 7.2" (D)